Home > Hard Drive > Attaching Slave IDE Hangs Otherwise Perfect Win 7

Attaching Slave IDE Hangs Otherwise Perfect Win 7

Contents

Most modern CD drives are ATA33 while the modern hard drives are ATA133. It was at this point that I remembered that I still had 20 gigs of unallocated space resting between the OS partition and my bigger data partition. It is not dead? I thank you. his comment is here

but i used it before and it runs fine but after some days this prob is showing.. too many different things have been reported and drive changes. After that there was no longer any DMA/PIO choice in the controller options, but everything now works right automatically. 2007-05-15 – John Schumacher confirms: I thought I was having this problem, You can try changing cables and trying a different power connector, but if the drive worked and then no longer works, this likely means the drive has failed.

Ide Hard Drive Jumper Settings

November 29, 2012 James Oh ok, I figured it out. Wonder what connects to where on the cable? it sees the other 500gb fat format and the other recognisable is the 500gb ntfs. Also, when I first installed windows (Win XP SP3) on the machine writing DVDs also worked fine (with NERO 8 and other programs).

Now i can access all of the information from that drive. See the images below for examples of our most common jumper settings. When I replaced the cable I had an error stating check cable connection pxe-mof : exiting intel pxe rom operating system not found. Seagate Ide Hard Drive Jumper Settings My System Specs OS Win7 Build 7600 x86 CPU Pentium II 300MHz Motherboard Asus Memory 32mb EDO RAM Graphics Card Diamond Viper Sound Card Soundblaster 16 Monitor(s) Displays 14" AOC CRT

My old HDD is a desktop HDD Seagate brand Barracuda 7200.7 it's a very old one. my pc doesn't show windows. I had been using my laptop for DVD viewing for years, until I inserted a borrowed and heavily scratched DVD. http://www.tomshardware.com/forum/260951-32-windows-hang-loading-start Not saying there is not anything wrong with any of your hardware but it seems funny everything worked until you popped in your XP install disk.

In BIOS, set your controller to legacy/IDE/whatever (not AHCI). Master Slave Hard Drive Jumper Settings So the faulty here is really the old one. Thanks! I plug the new hdd to powersorce and sata socket and when i turn on the pc i can feel it runing, but when i enter in device manager i see

How To Connect Ide Hard Drive To Sata Motherboard

Do you have any suggestions for me ? If this is a new hard drive, join our forums and ask your question there. Ide Hard Drive Jumper Settings Input the capacity of the partition and click on the Apply button. How To Connect Ide Hard Drive To Motherboard It might see the second drive that Windows missed.

I put my laptop hard drive Seagate ST950042 0AS 500 gb (it stopped working) into external enclouser and plug into my other laptop throughr USB. Kind regards JanglyJ Login to post comments Was TOO EASY Fri, 2011-10-21 20:55 by wayne Not only did it work, but the difference was like night & day. Thanks Dave. Stupid ocham's razor! How To Install Ide Hard Drive

I strongly suspect the HDD reverts to PIO, as it is still slow if I end the DVD-R process and try to resume regular work on the PC. Eian Ampoloquio May 1, 2013 at 1:13 pm yeah. Thanks in advance June 16, 2012 Mark Hi, i am running two hardrives a 74gb WD and a 1.5TB WD both SATA drives, the problem I am having is that sometimes Generally speaking if there is a diskette drive, that would be first.

All I am saying here is you never know. Ide Cable Select And here is my CPU... Then i "play" a litle starting up from Hirens boot cd from cd drive and i go to Gparted software, then i exit and restart my computer, and voilá Bios can

Fri, 2011-12-23 01:12 by boster I'm on Windows 7.

The BIOS picked it up, and I was able to see everything on Windows 7. You have to check and, if necessary, tell Windows to try to use DMA first. You think re- inserting it into an external HDD case would be a good idea? Western Digital Ide Hard Drive Jumper Settings Started copying some video files off it. 3 of 12 were copied fine, then a message came up that it could not read the drive and finish the transfer.

I had already re-partitioned. I have replaced the CMOS battery and tried different cables aswell as formatted them. Now, I suspect that all this is due to the installation of some program named "Aspi rip" which prompted me to install ASPI drivers for Win XP (which I did, silly Clicked install and bang, windows pop up saying i shouldnt install the drive.

Mind you, reading windows support pages, I did see something mentioned about that RCR errors "relaxing" change with ASPI mentioned, so I guess that must be the reason. The recovery disks might or might not work with the new drive. Still wondering about some weird HDD problem, I ran the most thorough Windows drive check (chkdsk c:/x/f/r) which cuts in after the next reboot. I still don't want to do this until I'm confident that at the very least my 160 gig is reading at its proper size.

Sun, 2011-09-04 06:29 by Snowsharkeus So, I spent the last several hours trying to figure out why the music I was streaming started getting super choppy, distorted, and just plain un-enjoyable!! Sometimes that fixes weird problems like this. Also, the hard drives are most defiantly SATA, so I don't know why the BIOS reads them like that. If you want to do that you'll just have to make sure that it's plugged into the right part of the cable.