Home > Hard Drive > HDD Installation

HDD Installation

Contents

In the BIOS, go to the standard System Settings menu or the Integrated Peripherals > SATA menu to see all of the drives installed in the system. Thanks for the tip. Refer to your motherboard documentation for detailed information for your motherboard. Connect one end of the SATA cable to the drive, and the other end to an available SATA port on your motherboard, and you’re halfway there. http://splashwebservices.com/hard-drive/hard-drive-not-found-during-installation.php

Bu videoyu bir oynatma listesine eklemek için oturum açın. If it can't reach the empty bay, see if any bundled adapters help. Otherwise, make sure that you are grounded before starting to work on the inside of the computer. Otherwise, performance may be constrained.

How To Install A Second Hard Drive

Speaking of size, you’ll also need to make sure you buy a drive with the correct physical dimensions. Yes No Not Helpful 3 Helpful 2 What do I do when my hard drive has been damaged? Turn it over and remove the battery from the back of the laptop. Flag as duplicate Thanks!

When you first turn on the computer, your new hard disk may not be ready for use immediately. Some enthusiast-class also cases give users the ability to remove drive cages or to mount them in different positions to optimize air flow and simplify cable management. Some older systems may see the drive and classify it as a SCSI device if you are using a Serial ATA host adapter. How To Connect Hard Drive To Motherboard Use an anti-static strip or touch the screw on an active light switch cover to ground yourself before touching the components and cables inside your computer.

The follow up is here: http://www.makeuseof.com/tag/setup-hard-drive-windows/ - though it deals more with configuring a new drive, since an old drive is going to already be partitioned with data on it (but Within the system setup program, instruct the system to auto detect your new drive. 3. This rule isn’t absolute, however, because some all-in-one computers use 2.5″ drives. Download and run HWiNFO tool (approx. 3 MB) at hwinfo.com The portable version is preferred. ***The Drives section of the System Summary window will indicate the bandwidth for the HDD installed

Removing the cover will reveal the drive, which is itself typically attached with a few screws. How To Install A New Hard Drive Windows 7 http://pad3.whstatic.com/images/thumb/a/a7/Install-a-Hard-Drive-Step-10-Version-2.jpg/550px-Install-a-Hard-Drive-Step-10-Version-2.jpg http://pad1.whstatic.com/images/thumb/a/a7/Install-a-Hard-Drive-Step-10-Version-2.jpg/300px-Install-a-Hard-Drive-Step-10-Version-2.jpg /5/58/Install a Hard Drive Step 10.360p.mp4 Make sure that all of your connections are secure. wikiHow Contributor Try to fix it. However, in doing this, I think Ghost then prevents me from allowing the new drive from becoming the Master Boot Drive (which is what I want).

Install New Hard Drive Windows 10

Yes No Cookies make wikiHow better. About Ziff Davis, LLC. How To Install A Second Hard Drive Some cases come with tool-less brackets that make mounting hard drives really easy. How To Install A Hard Drive In A Laptop Mac Pro users just need to open the side, remove an empty disk tray, attach the sata hdd to the tray, put back in and format for example.

Click Start > Control Panel > Administrative Tools > Computer Management, and choose Disk Management from the tree at left. Sorry There was an error emailing this page. Xp. Refer to your computer system documentation to see if your system supports Serial ATA on the motherboard and to locate the Serial ATA connector. How To Format A New Hard Drive

The drive should slide directly in, and the holes on the side of the drive should line up to the screw guides on the housing. All Rights Reserved. Step 2: Examine data and power connections Tracing along the SATA cable of an installed drive will lead you to the SATA connectors on your PC's motherboard. his comment is here Flag as duplicate Thanks!

Once the hard drive has been inserted, use the screws that came with it to secure the hard drive in the housing. How To Install A New Hard Drive On A Laptop Once you’ve placed the hard drive in the housing, press it firmly into the connectors. RESPECT: James Bruce - simply modest and virtually real Keep up the good work!

next 8. (when finished) > finish *** now your hdd will show up in windows explorer (or my computer) because NOW ONLY it (JUST) became usable!

The cable is usually gray in color. If you do find yourself with an IDE drive, you’re not completely out of luck but I’m afraid it’s out of the scope of this guide. HBT 231.472 görüntüleme 7:31 Add a second hard drive to your pc - Süre: 9:18. How To Connect Sata Hard Drive To Motherboard Reply James Bruce January 22, 2011 at 12:14 pm Good point nizbot - the title should be more appropriate.

So my question is do I need to install two drives or can I install just one. Create an account EXPLORE Community DashboardRandom ArticleAbout UsCategoriesRecent Changes HELP US Write an ArticleRequest a New ArticleAnswer a RequestMore Ideas... In the window that appears, click Disk Management under the Storage header, to list the disks in your computer. weblink Depending on the laptop, you may have to remove a screw or two before you can remove the hard drive.

Method 2 Laptop Hard Drive 1 Power down your laptop. If you have a slim desktop then read on, as there is a chance you will have enough room for a second drive. Now would be a great time to familiarize yourself with the basics of your computer. Replace the side, and power up the machine.

Comments Add more storage to your PC with a new hard drive In 2011, hard disk prices roughly doubled after factories in Thailand were devastated by flooding. If your system does not have a Serial ATA connector on the motherboard, you must purchase a Serial ATA host adapter that is compatible with your computer and operating system and Note: Serial ATA connectors are keyed to ensure correct orientation. 2. Content continues below 3.

Next, follow the SATA data cable (not the power one) to the motherboard, and have a look at where it is plugged in. Oturum aç 50 Yükleniyor... This is nevertheless a very useful guide and very clear so thank you for it(I have bought several drives and they haven't had screws again check ebay or your local repair Geri al Kapat Bu video kullanılamıyor. İzleme SırasıSıraİzleme SırasıSıra Tümünü kaldırBağlantıyı kes Bir sonraki video başlamak üzeredurdur Yükleniyor... İzleme Sırası Sıra __count__/__total__ How to: Install a Hard Drive into a Desktop

Host adapter configuration is shown below. With the cloning technique, this can save a lot of time and effort. A Serial ATA interface cable (sold separately). If the hard drive is loose, it can rattle and cause more noise and lead to physical damage.

Our company are using acronis true image and many of my colleagues are using easus todo backup home which is free for home users. I really wanted get one of the those second drive kits for my old macbook pro since the DVD was shot anyway, but they were sold out at the time so