Home > Win 7 > WIn 7 64-bit BSOD Due To PCI Internal Dial-Up Modem Hardware Install?

WIn 7 64-bit BSOD Due To PCI Internal Dial-Up Modem Hardware Install?

The Table of Contents Links will take you to the actual (long) Table of Contents. That is why Winmodems are so inexpensive and manufacturers are not interested in supplying drivers for newer operating systems. On the Windows 7 32-bit box make a new folder under C:\Program Files\HyperTerminal and for 64-bit make a new folder C:\Program Files (x86)\HyperTerminal Find a Windows XP box and copy WinDbg Output Example: INVALID_DATA_ACCESS_TRAP (4) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x00000005: INVALID_PROCESS_ATTACH_ATTEMPT (go to top of page) Usual causes: Specific known issue with XP SP2/Server 2003 and Check This Out

i should be more specific, im sorry my fault.Well, the "PCI Device Listing" screen is right after the splash screen. You will need to download something. I amrunning a dual boot situation with Windows 7 Pro 64-bit and a Windows 8 Pro64-bit on different primary partitions on the same internal hard drive. I ran a System File Checker (sfc /scannow) while in the Windowsenvironment and it stated at the conclusion, "WindowsResource Protection didn't find anyintegrity violations." Yes, obviously, you're going to say it

Might look in the BIOS and see if there is a listing of PCI and PCI-e that may need attention or we could help you with.Right after the Splash screen, that Another program is the free Hyperterminal program that came with Windows XP. PAGE INFORMATION: Initial document from the bugcodes.h file in the Windows 7 SDK v7.0; Debugging Tools For Windows - dated 17 January 2009; Additional information added as it became verifiable on Pro Slate 12) OR Browse all HP products Please wait while we process your request.

This bug check appears very infrequently. If you want to have HyperTerminal on your Start Menu just create a shortcut to hyperterm.exe and put it in C:\ProgramData\Microsoft\Windows\Start Menu\Programs and when you go to All Programs under the WinDbg Output Example: SPIN_LOCK_ALREADY_OWNED (f) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x00000010: SPIN_LOCK_NOT_OWNED (go to top of page) Usual causes: MSDN Listing (Win2K ResKit): http://msdn.microsoft.com/en-us/library/ms818821.aspx MSDN Change product Choose from all HP products Enter product serial number Please wait while we process your request.

Modems still fill a niche for dialup Internet in rural areas that are not serviced by broadband, (and probably never will be), for older NetZero users on fixed incomes who cannot The second attempt to acquire a spin lock is not blocked in this case because doing so would result in an unrecoverable deadlock. If you installed the 64 bit version, all drivers have to be signed and windows 7 certified. http://newwikipost.org/topic/WVUWMonJDQAVYKyvt8M1BncUuJ89Xnx3/How-to-connect-an-internal-dial-up-modem-to-a-router.html However, a thread that is holding a spin lock must maintain an IRQL greater than or equal to that of the spin lock.

First and foremost, yes, I do indeed have the Memory Dumps checked in CCleaner. ..and I have ran CCleaner since I removed the PCI dial-up modem and since this issue stopped. This bug check appears very infrequently. If you can help me, please suggest to me how I can stillkeep installed my added PCI dial-up modem and stop getting this BSOD issues??? To find the INF file to modify, under Windows 7 do the following, go to Control Panel, Phone & Modem, Modems, click modem then Properties, then General and note the exact

STOP error numbers can either be the full number (0x0000007B for example), or in "shorthand" (0x7B is shorthand for 0x0000007B). http://www.portlandiacloudservices.com/dialup-modems-under-windows-7/ But that is when they run into trouble. worst case, consider buying a current dial-up card. Find by product name or number (e.g.

Change product Choose from all HP products Enter product serial number Please wait while we process your request. his comment is here It is not supplied with Windows 7 but if you want to continue to run it under Windows 7, here is how to get that version of HyperTerminal on to Windows Windows 7 Help Forums Windows 7 help and support Hardware & Devices » User Name Remember Me? The system will use this buffer to keep track of wait objects.

Do you wish to proceed to the home page of the new product? Pro Slate 12) OR Browse all HP products Please wait while we process your request. I'll start with a bit of modem hardware history. http://splashwebservices.com/win-7/win-7-install-error-while-completing-setup-on-my-840-pro-ssd.php Brand new Windows 7 and Windows 8 systems are 64bit, (and many lack COM port hardware) and virtually all older modems were not released with 64bit Windows "drivers" Or, were they?

Therefore, I will be a few days before returning here. Take me to the General STOP message troubleshooting section... Edited by Nergal, 15 March 2013 - 08:52 PM.

Knowledge Centered Support 2016-12-05|Dec 5, 2016 17 HP is Updating the Video BIOS for NVIDIA K6000 Graphics Cards Product Change Notification 2013-12-10|Dec 10, 2013 132 HP Installer Kit for Linux: Important

Please notify me if you find anything wrong, missing, new, or just have a comment. This bug check appears very infrequently. This option is most effective when only one driver or service is added at a time. Please try again later.

When you install a modem in Windows 7 and go to Control Panel, Phone & Modem, Modems, Properties, Diagnostics, you MAY notice that under Logging, the Append to Log is greyed This indicates that the current thread exceeded the permitted number of wait objects. System restarts are more common with BSODs than system shutdowns. navigate here A Softmodem is so named because it is partially implemented in a software driver.

Simple. Like XP, under Windows 7, modem logging is ALWAYS on. If the value of Count exceeds the allowable value, this bug check is issued. Hardware serial port modems only use the INF file, software Winmodems use the INF file plus a hardware driver that works in conjunction with Unimodem.

TV shows and movies used the sound during scenes and most people could tell right away what it was. If you do, then choose "Load Optimized" in the BIOS afterward, save and reboot.Take out the Audio Card, use the green plug in the back for your audio, reinstall Win-7, and To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool Check the System Log in Event Viewer for error messages that might identify the Better modems can also give information on line quality and signal strength.

While many new PCs no longer have them, serial ports are easy to add with a card. And, for threads that hold a spin lock, ensure that you are not decreasing the thread IRQL to a level below the IRQL of the spin lock that it is holding. Problemsignature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additionalinformation about the problem: BCCode: 1000007e BCP1: FFFFFFFFC0000005 BCP2: FFFFF88005EBAB20 BCP3: FFFFF88003977688 BCP4: FFFFF88003976EE0 OS Version: 6_1_7601 Service Pack: 1_0 If you can help me, please suggest to me how I can still keep installed my added PCI dial-up modem and stop getting this BSOD issues???