Home > Windows 10 > Change To AHCI After Installing SSD Won't Show My HDD

Change To AHCI After Installing SSD Won't Show My HDD


you are a life saver. Thanks for making my life a little easier and less frustrating today! You need to have the proper drivers and select the right chipset, change the mode in the bios, then reboot and if everything was correctly configures, it will work. Israel Leite Dude. http://splashwebservices.com/windows-10/can-t-get-ahci-to-work-again.php

Thank you. saugox Running Windows 8.1 and the alternative method, with safe boot, worked for me. He posts photos at In Photos and can also be found on Google+ and Twitter. Your method, contrary to a lot of misinformation on the internet, much of which required a full reinstall of Windows 7, worked perfectly the 1st try. http://www.sevenforums.com/hardware-devices/377064-change-ahci-after-installing-ssd-wont-show-my-hdd.html

Samsung Ssd Ahci Mode Deactivated

The HDD (a Western Digital 500GB) is listed in the device manager and the disk management (it also shows up in BIOS when I want to select the hard disk priorities, Many thanks. Attempt these fixes at your own risk.

Unfortunately after successfully installing Windows I now have the problem that I can't access my HDD anymore! devnullius I just checked my x64 Windows 8 -> 8.1 -> 10 (upgraded) machine… The registry key is not there. I also tried injecting the correct drivers with Paragon P2P Adjust (which does NOT recognize AHCI as a driver to add on 2 systems I tried). Windows 10 Ahci Driver First I faced wih this problem while installing xp in the "Compatible mode" it was treated by manual updating of controller driver and rebooting in the AHCI mode.

Sure enough, when I went into the BIOS and set the SATA operation to ATA, the installation completed without further issue. Windows 10 Won't Boot In Ahci Mode solved Intel SSD-510 not available in Win7 setup in IDE, AHCI, or RAID mode solved HELP - Need To Convert From IDE to AHCI Mode on SSD & HDDs Asus a88x-pro Knowledge Base - What Is the Default Partition Style Used in Windows 7? https://www.tenforums.com/drivers-hardware/15006-attn-ssd-owners-enabling-ahci-mode-after-windows-10-installation-2.html The software comes highly recommended and I know that it has helped many ppl in the Tom's forum in the past.

Great Job in specifing the exact steps. Enable Ahci Windows 7 Looking to shut off the RAID. Before making attempts below, we highly suggest creating a backup for this disk if it saves important files. My BIOS was reset because my computer had no power for a couple of weeks, and with BIOS reset to IDE I couldn't find my RAID disks.

Windows 10 Won't Boot In Ahci Mode

Then the problem would go away for a while. http://superuser.com/questions/615900/switched-3-hdds-from-ide-to-ahci-i-cannot-see-one-of-them-in-windows-now I don't want to install windows, reinstall the drivers, and try to find and reinstall all of the apps that came with the computer (over 80% of them are actually useful.) Samsung Ssd Ahci Mode Deactivated Reading Material Hannibal House The story of a Seattle man who visits Wales, and decides to buy a house there. How To Enable Ahci In Windows 10 Ranger4 View Public Profile Find More Posts by Ranger4 31 Jul 2015 #5 Corona77 Windows 10 64 bit 6 posts Quote: Originally Posted by Ranger4 Does your

I don't recall seeing a BIOS setting for Legacy or UEFI. his comment is here I'm unable to summon my BIOS to reverse my changes and fear my data is lost for good. (I have so much crossover on various clouds I'm not sure what's backed New SSD has Windows 7. Double-click on it and set its value to 0 (That's zero and not alphabet O). 4. Ahci Vs Ide Ssd

Restart the computer again and change the SATA operation to AHCI in BIOS. Greenalien Many thanks for this tutorial, worked perfectly for me. Then, you can refer to the post Copy Disk to get detailed steps to clone a hard disk. this contact form Solution 2.Update or install storage controller driver.

So how to fix this classic problem?? How To Enable Ahci In Bios Currently investigating the SSD. For starters, what was the question that you said yes to?

In order to be able to boot from AHCi without reinstalling windows, you need to go in registry and find the msahci.sys and modify the key to 0.

After you set the value of Start to 0, you may not notice that anything loads. I'm not the only one with this problem but forum threads were usually: Filled up with replies from people saying, "me too". How to Partition Hard Disk before Installing Windows 10. Ahci Or Ide But freezing started again…I will downgrade Nvidia driver, turn off AHCI and check.

In the right pane, right-click Start in the Name column, and then click Modify. 6. Unplugged every hardware i could and plugged it back in (graphics card, memory, SSDs/HDDs etc.) when i booted my system back up, it started a disk check. Whichever it is, try switching to the other and see if that makes your drives visible.Next, in order to see the 3 TB drive in Windows it must be set up http://splashwebservices.com/windows-10/search-box-doesnt-show-results.php Thanks to Windows7Themes.net for having the answer: Basically, change the following registry key to 0: HKEY_LOCAL_MACHINE\System\CurrentControlSet\services\msahci\Start Restart the computer once (without changing any BIOS settings) and Windows will load default AHCI