PC Startup Is Slow After Boot Drive Upgrade
It did not help me but you may be able to look at the log with and without using the F8 boot option and see what is different.http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windows-7/ Thanks for the I just tried it but it still has the same boot lag. Read the post above. For now I'm just not going to put any Windows backups on it and use the eSATA drive for that. http://splashwebservices.com/windows-10/windows-startup-takes-ages-depending-on-the-boot-drive.php
Indexing is not enabled for the drive. It zips by in a second and its doing its thing before Windows even starts to load. I can still boot in about 8 seconds. I don't think this is what solved it but I am adding it just in case. click here now
Windows 10 Slow Boot Up
No problem, fast boot. I turned system protection back on for my HHD, at 35%. TanquenFeb 17, 2012, 8:45 AM I guess the alignment is ok as all are divisible by 4096.c:\Windows\System32>wmic partition get BlockSize, StartingOffset, Name, IndexBlockSize Index Name StartingOffset512 0 Disk #0, Partition #0 There is a lot of drive activity but I can see why.
I may give that a shot but I think I’d cry if it ran fine on one of the SATA2 ports. ThePixelWhispererFeb 27, 2013, 7:23 PM I've discovered that, like some of the previous posters, USB 3.0 external hard drives are picky about how they're plugged in. RealBeastFeb 17, 2012, 9:26 PM I would run SeaTools on it from: http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=184.108.40.206.1&vgnextoid=3b17fbbad0f89210VgnVCM1000001a48090aRCRDIt doesn't look like there is any new firmware -- Seagate doesn't even have it on their site. Windows 10 Anniversary Slow Boot I personally used EaseUS Parition Manager (free edition) to format the HDD as a Logic drive, rather than a primary drive.
The drive was new OEM in an unopened static packet. Any ideas?It’s a new build with:ASRock X79 Extreme 9 motherboardSamsung 512MB 830 SSDSeagate 4TB Hard DiskThe SSD and the larger disk drive are both on the only 2 Intel SATA3 ports. When I inserted my 3TB drive, it would slow the Windows boot to about 40 seconds.I had turned on System Protection for my HHD, due to the threat of ransomware trojans http://www.expertreviews.co.uk/software/operating-systems/1403760/how-to-fix-the-windows-10-slow-boot-bug I chose the "Reset your PC" option.
every solved After Windows 10 update PC is very slow with disk always 100% My Boot Drive is Inaccessible After a Windows 10 System Reset - Please Help! Windows 10 Slow Boot After Anniversary Update I had the same thing with my 3TB Toshiba (Hitachi) drive on my i5-3570K system. If I move it to any other port its a little slower. I had a few downloaded apps and drivers on it and chose not to reformat.Thanks for all ya'll tips!
Windows 10 Slow Boot Black Screen
Don't run a Windows system backup. https://www.macecraft.com/fix-slow-boot-issues-windows10/ meeveretMay 1, 2014, 9:08 PM Thanks to everyone in this post especially Tanquen, after searching for a few hours over the course of a few days I finally found this thread Windows 10 Slow Boot Up New firmware maybe? Windows 10 Slow Boot 2016 Since it is a HDD, it would not saturate even a SATA II port bandwidth, but you never know where the bug is now, so it could work?
I just don't understand it. news HardwareHead, Radek87 and profuturus have something a little different going on. I tried disabling the other 2 SATA controllers. System won't boot after adding new cooler solved Mechanical Hard Drive Slowing SSD Boot Times solved PC boot real slow after adding SATA 2nd HD ??? Windows 10 Slow Boot Ssd
But could anybody explain to me why this may have caused a problem? solved Moved all components to new case. There may be an answer there as that information is specifically to help troubleshoot long startups or shutdowns. have a peek at these guys Tanquen said: I’m running a Samsung SSD and it starts up Windows 7 pretty fast.
After installing Windows 7-64bit Pro I only had the SSD installed and everything was great so I installed Norton plus other apps, all still okay. Windows 10 Slow Login The plan was to add other backup only drives to the Marvell ports later.One of the first things I did after adding the HDD was move the page file to it I had found some info online about the boot order and such.
profuturusMay 17, 2012, 7:55 AM Tanquen said: Try Googling: “Windows 7 boot time optimization” In one of the Windows logs you can see how long Windows spends on each action during
If I move it to any other port its a little slower. I reformatted the drive and reboot went back to 20ish seconds from 5ish minutes kaswynFeb 18, 2015, 3:46 AM Hi guys,I know this is an old post, but it is super Then i go format the 4TB HD, and then check the Previous Versions again and found the records is missing now.11. Windows 10 Slow Boot After Update I initially was using the windows Partition manager.
I was thinking maybe ASRock set something incorrectly and that is also why I was on the Intel ports.I was going to format the HDD as two 2TB partitions to possibly I tried plugging the LaCie drive directly into the UPS. This did not help.With nothing plugged into them, the Marvell controllers don’t change the boot time. check my blog This didn't help.3.
If this issue is a driver than it will not load correctly and you can see which one is causing the issue. edifice1981Jul 2, 2013, 2:31 AM Firstly sorry if i haven't posted this correctly, don't use forums often.Thanks Tanquen for your valuable input in writing this and updating it. Once the Windows logo comes up it takes maybe 5 or 10 seconds to display the login prompt.